CA Glue Thin for 3D Print 20g

ASK CA Glue Thin for 3D Print (20 g) - ideal for bonding and repairing 3D printed parts made of PLA, PETG and other materials. It quickly creates a strong bond and thanks to its thin consistency, it will flow perfectly even into fine joints.

Whether you're gluing PLA or PETG prints, ASK CA Glue Thin for 3D Print 20g will be your new best friend.
This thin, instant adhesive has been developed specifically for 3D printing - creating a clean, strong and precise joints in seconds without damaging or smearing the surface of your printed parts.

Thanks to its low viscosity, it easily flows into even small cracks and hard-to-reach areas, making it great for repairing, joining or final assembly of 3D printed models.
Once cured, the joint is strong, smooth and easy to machine.

Uses:

• Apply a small amount of adhesive to one of the surfaces to be bonded.
• Connect the parts and hold for a few seconds.
• Use ASK Activator for CA glues for instant curing.
• Suitable for materials:
• PLA, PETG and other common 3D printing materials
• Also suitable for wood, metals, ceramics and some plastics

Warning:
Not suitable for polystyrene foam, polyethylene, Teflon and silicone.
Contains substances classified as hazardous under Regulation (EC) No 1272/2008 - use in a well-ventilated area and protect eyes and skin.

Volume: 20 g